If You Think You Get , Then Read This

Tips For Ceiling Fan Installation
Ceiling fan installation can be a fun and rewarding home improvement project. It’s also a great way to add an extra dimension of style to your home. But before you get started, be sure to clear your workspace of debris and make a checklist of everything you’ll need.

First, measure the room for ceiling height and determine whether you need an electrical permit. This can save you a lot of time and hassle later on, as you may be required to have a professional electrician complete the job if your local building code requires it.

Second, check the electrical box to ensure it’s able to support the weight of the fan you want to install. If it’s too small, you’ll need to replace it with a new one. The electric box is usually located in the center of the ceiling, but it can also be attached to the ceiling joists if you choose to add a brace box that sits between the joists.

Third, mark the location of the electrical box using a pencil or stud finder and determine where it will be placed in relation to the center of the room. If you have one joist, the box can be placed there; if there are two, you’ll need to use a brace and saddle to attach the box to each joist.

Fourth, wire the ceiling fan according to manufacturer’s instructions and connect it to the light switch. This will require twisting together several different wires to create the connections, but it’s a simple task that should only take you a few minutes.

Fifth, attach the ceiling fan motor to the bracket, making sure to use the screws provided. It’s usually a good idea to remove the shipping blocks that hold the motor in place before you start this step. Then, pull the wires up below a circular cardboard cover that keeps most of the wiring from falling out, and then attach the light kit to the motor.

Sixth, wire the fan’s downrod, which is a metal pipe that extends from the fan blades to the ceiling. The downrod needs to be long enough to reach the ceiling, and it should be at an angle that matches the depth of your room. If the downrod isn’t long enough, it will sag and break during installation, which can be costly.

Finally, install the blade irons and mount the fan blades. This will involve a little bit of work with your hands and a power tool, but it’s well worth the effort for the added convenience.

Finalize your plan before you begin, and be sure to lay out all of the parts of the fan before starting the actual installation. This will save you time and frustration later on, as you won’t be digging around for each piece as you go.

To install the ceiling fan, you’ll need a ladder and a dusk mask, both of which are essential safety tools for this project. It’s also a good idea to have someone else with you while you’re on the ladder, to offer assistance in case anything should happen.

5 Lessons Learned:

What Do You Know About